CFDHR - RECYCLED LATEX PAINT, 840 SERIES ALL COLORS.
- MSDS: CFDHR
- Manufacturer: E COAT RECYCLED PAINT PRODUCTS
- Product Name: RECYCLED LATEX PAINT, 840 SERIES ALL COLORS.
- National Stock Number: 8010-01-380-2381
Product Identification
Product ID:RECYCLED LATEX PAINT, 840 SERIES ALL COLORS.
MSDS Date:07/03/1996
FSC:8010
NIIN:01-380-2381
MSDS Number: CFDHR
Responsible Party
SACRAMENTO, CA 95838
US
Emergency Phone: 916-921-0165
Info Phone: 916-921-0165
Preparer: JULIAN SHAFER
Cage: TO169
Contractor
Telephone: 916-921-0165
Cage: TO169
Ingredients
ETHYLENE GLYCOL (SARA III) (VP = 0.1 @ 68F)
CAS: 107-21-1
RTECS: KW2975000
Fraction By Weight: <5.0%
OSHA PEL 50 PPM
ACGIH TLV: 50 PPM
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL: DIZZINESS, HEADACHE, NAUSEA,
CONFUSION, IRRITAION TO UPPER RESPIRATORY TRACT. SKIN AND EYE
IRRITATION. CHRONIC: SILICOSIS.
First Aid
First Aid:INHALATION: REMOVE TO FRESH AIR. RESTORE BREATHING. CONSULT
PHYSICIAN. EYE: FLUSH WITH LARGE VOLUMES OF WATER FOR 15 MINUTES.
GET MEDICAL ATTENTION. SKIN: WIPE OFF WITH A RAG. WASH THOROUGHLY
WITH SOA P AND WATER. INGESTION: CONSULT HOSPITAL EMERGENCY ROOM OR
POISON CONTROL CENTER IMMEDIATELY.
Fire Fighting
Flash Point:NONE
Lower Limits:NA
Upper Limits:NA
Extinguishing Media:NA
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT.
Accidental Release
Spill Release Procedures:VENTILATE AREA TO PREVENT BUILD-UP OF VAPORS.
SMALL SPILLS: SOAK UP WITH ABSORBENT. LARGE SPILLS: DIKE AREA WITH
ABSORBENT MATERIAL AND SCOOP UP LIQUIDS.
Handling
Handling and Storage Precautions:STORE UPRIGHT IN SEALED CONTAINERS
AWAY FROM HEAT AND FLAME.
Other Precautions:REMOVE AND WASH CONTAMINATED CLOTHING BEFORE REUSE.
Exposure Controls
Respiratory Protection:USE PARTICLE MASK (NIOSH/MSHA), OR WEAR FITTED
RESPIRATOR FOR ORGAINIC VAPORS W/A DUST FILTER.
Ventilation:LOCAL CROSS VENT OR MECHANICAL EXHAUST.
Protective Gloves:RECOMMENDED.
Eye Protection:GLASSES WITH SIDE SHIELDS OR GOGGLES
Supplemental Safety and Health
NK
Chemical Properties
Boiling Pt:B.P. Text:212F,100C
Melt/Freeze Pt:M.P/F.P Text:32.0F,0.0C
Vapor Density:< AIR
Spec Gravity:1.25-1.35
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:VARIOUS COLORS
Percent Volatiles by Volume:55-70
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:NA
Hazardous Decomposition Products:MAY PRODUCE HAZARDOUS FUMES WHEN
HEATED TO DECOMPOSITION AS IN WELDING.
Disposal
Waste Disposal Methods:LANDFILL IN SEALED METAL CONTAINERS IN
ACCORDANCE WITH LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.